The face loses volume long before it loses skin quality. Cheeks flatten, temples hollow, the jawline softens, and the under-eye area starts to shadow, all because the fat pads that once held everything in place have thinned or shifted. Hyaluronic acid fillers can address some of this, but they dissolve on a schedule, and surgical fat grafting asks a great deal of a patient who may only need a few cc of correction. AlloClae for face offers a third solution. An injectable adipose tissue matrix that rebuilds facial volume with a tissue-based material, delivered through a needle in a single office visit.
Fat Transfer to Face with AlloClae in Seattle, WA
$400
per cc
per cc
1 Hr
Procedure Time
24-48 Hrs
Recovery Time
$400
per cc
per cc
1 Hr
Procedure Time
24-48 Hrs
Recovery Time
What is AlloClae for Face?
Think of fat transfer to face with alloClae as fat grafting without the grafting. Patients get the soft, tissue-integrated quality that made facial fat transfer popular in the first place, while skipping the parts that kept many people from choosing it: the liposuction, the bruised donor site, and the uncertainty about how much fat will survive.
This matters most for the very patients who need facial volume the most. Naturally slender people and those who have lost significant weight often have the most pronounced facial hollowing and the least fat available to harvest. AlloClae removes that obstacle entirely.
Can alloClae® Be Used in the Face?
Yes, the facial fat compartments are exactly the kind of small, well-defined spaces where a structural adipose matrix performs well. AlloClae in face treatments is placed in the same anatomic planes a surgeon would target during a traditional fat graft, but without the harvest step. The material is soft enough to blend into the contours of the cheek and jaw yet firm enough to provide genuine lift and projection where the face has deflated.
Common facial treatment zones include:
- Midface and cheeks: restoring the youthful fullness that supports the lower eyelid and softens nasolabial folds
- Temples: filling the hollowing that gives the upper face a gaunt, skeletal appearance
- Jawline and chin: sharpening definition and improving balance with the rest of the profile
- Prejowl area: smoothing the notch that forms as the jawline begins to sag
- Nasolabial and marionette folds: softening deep creases from beneath rather than on the surface
- Hollowed lower cheeks: correcting the drawn look that follows weight loss or aging
Why Choose AlloClae for Facial Volume?
Volume loss is the root cause of much of what patients read as “aging.” Address the deflation, and lines soften, shadows lift, and the face regains the proportions it had before. AlloClae face treatment is designed for patients who:
- Want a natural, tissue-like feel rather than a gel-like fullness
- Have hollowing or asymmetry that gel fillers have not fully corrected
- Are too lean to harvest enough fat for a surgical graft
- Prefer to avoid the liposuction and recovery of traditional facial fat transfer
- Want a longer-lasting approach to volume than repeated filler appointments
The goal is restoration, not transformation. Friends notice you look refreshed; they do not notice a procedure.
How Does Treatment of AlloClae for Face Work at Seattle Plastic Surgery?
- During the consultation, the surgeon studies the facial proportions, asymmetries, and areas of volume loss, then maps the treatment zones
- The skin is cleansed, and a local anesthetic is applied so placement stays comfortable
- Using a fine needle or cannula, the adipose matrix is layered into the deep and mid-level fat compartments in small, controlled amounts
- Volume is visible immediately, allowing real-time adjustment for symmetry and contour
- Each side of the face is compared and refined so the final result is balanced from every angle
The entire appointment takes about an hour. There is no operating room, no sedation, and no incisions to heal.
Difference Between AlloClae for face and Surgical Fat Grafting
| AlloClae for Face | Surgical Facial Fat Grafting | |
| Procedure type | In-office injection | Surgery |
| Tissue source | Screened donor adipose matrix (Donor Fat) | Your own harvested fat |
| Liposuction required | No | Yes |
| Anesthesia | Local numbing | Sedation or general anesthesia |
| Incisions | Needle entry points only | Harvest incisions plus injection sites |
| Appointment length | About 1 hour | Several hours |
| Downtime | 24-48 hours | Typically 1-2 weeks |
| Volume predictability | Immediate, visible placement | Variable graft survival |
| Best suited for | Lean patients or those seeking modest correction | Patients with adequate fat who want larger-volume restoration |
Is AlloClae Face Permanent?
alloClae® delivers immediate structural volume, and its preserved extracellular matrix is intended to integrate with your own tissue rather than dissolve on a fixed timeline like hyaluronic acid. Some settling is expected as swelling subsides and the material incorporates. Because the face is highly mobile and continues to change with age, Dr. Santos will discuss realistic longevity for your specific anatomy and whether a follow-up session would help you reach or maintain your goal.
What are the Risks Involved?
As with any injectable treatment, risks exist. These may include:
- Swelling, bruising, or tenderness at injection sites
- Infection
- Bleeding or hematoma
- Lumps, nodules, or cyst formation
- Asymmetry or contour irregularity
- Allergic or immune response
- Temporary skin discoloration
Facial injections also carry the rare but serious risk of vascular occlusion, which is why anatomic expertise is necessary. For this reason, it is recommended that alloClae® be placed by a surgeon who works with facial vessels and tissue planes daily.
Who Is a Good Candidate?
AlloClae for face works best for patients who:
- Have visible facial volume loss in the cheeks, temples, jawline, or midface
- Want a natural, tissue-based alternative to hyaluronic acid fillers
- Are too lean to be candidates for surgical fat grafting
- Prefer to avoid surgery and general anesthesia
- Want to address facial asymmetry or contour deficits
- Are in good health with realistic expectations
Patients with skin laxity may benefit from combining AlloClae with a surgical procedure such as a facelift or neck lift, since volume alone cannot correct loose skin. Dr. Santos will help you determine the right approach during your consultation.
How Does AlloClae Face Recovery Timeline Look Like?
01 — First 24 hours
- Mild to moderate swelling, most noticeable in the cheeks and under-eye area
- Possible pinpoint bruising at entry sites
- A feeling of tightness or fullness in treated zones
02 — 24 to 48 hours
- Most patients resume work and normal daily activities
- Makeup can typically be applied once entry points have closed
- Strenuous exercise and heavy lifting remain paused until Dr. Santos clears you
03 — 1 to 2 weeks
- Swelling resolves and the refined contour becomes apparent
- Follow-up visit to assess symmetry and integration
Recovery is far shorter than with surgical fat grafting, which typically requires one to two weeks away from social activities due to bruising and swelling at both the face and the harvest site.
AlloClae Price for Facial Treatment in Seattle
At Seattle Plastic Surgery, alloClae for face price starts at $400 per cc with a 4 cc minimum. Facial treatments generally require far less volume than body procedures, so most patients fall within a modest range. Your total cost of treatment is determined by the number of zones treated and the degree of volume loss, and Dr. Santos will provide an exact quote after your consultation.
| Volume | Estimated Cost |
| 4 cc | $1,600 |
| 6 cc | $2,400 |
| 8 cc | $3,200 |
| 10 cc | $4,000 |
Why Choose Seattle Plastic Surgery for AlloClae Filler in Seattle?
Patients searching for AlloClae for face near me often find injectors with limited facial anatomy training offering the product. Facial volume restoration is not a simple treatment. Where each cc is placed, how deep, and in what proportion to the surrounding structures determines whether the result looks lifted and natural or simply “filled.” At Seattle Plastic Surgery, every alloClae facial treatment is performed by a board certified facial plastic surgeon.
Meet Dr. David Santos
Dr. David Santos is a board-certified facial plastic surgeon whose practice at Seattle Plastic Surgery is dedicated exclusively to the face and neck. His surgical background includes facelifts, neck lifts, eyelid surgery, rhinoplasty, and facial fat grafting, giving him an intimate, hands-on understanding of the fat compartments, ligaments, and vascular anatomy that determine how the face ages and how it should be restored. That same knowledge guides every AlloClae face treatment he performs. He places volume where the face has actually lost it, not simply where lines appear on the surface. Patients seeking alloClae filler Seattle treatments benefit from a surgeon’s eye for proportion, a conservative approach that prioritizes natural results, and the safety of a JCAHO-accredited facility. Dr. Santos is known for taking time to explain options clearly, including when a surgical approach may serve a patient better than an injectable one.
Board Certified: American Board Of Facial Plastic and Reconstructive Surgery
Board Certified: American Board Of Otolaryngology – Head & Neck Surgery
Looking for a Non-Surgical Way to Contour Your Face? Look No Further
If your face looks tired in ways that skincare and gel fillers have not fixed, volume may be the missing piece. Schedule a consultation with Dr. David Santos at Seattle Plastic Surgery to find out whether AlloClae for face fits your goals, and receive a treatment plan and exact quote tailored to your anatomy. Our Seattle practice also welcomes patients from nearby areas such as Bellevue, Kirkland, and Tacoma, as well as communities throughout Washington State. Book Your Consultation Online.
FREQUENTLY ASKED QUESTIONS
Can AlloClae be used in the face?
Yes, AlloClae® is well suited to facial volume restoration because it is placed in the same fat compartments a surgeon would target during traditional fat grafting. Common areas include the cheeks, temples, jawline, chin, prejowl region, and deep folds around the mouth.
Is alloClae a fat transfer?
No. A traditional fat transfer harvests your own fat through liposuction and re-injects it into the face. AlloClae uses a processed donor adipose matrix, so there is no liposuction, no harvest site, and no surgery. It provides a similar tissue-like quality without the surgical steps.
How is AlloClae different from hyaluronic acid filler?
Hyaluronic acid fillers are smooth gels that the body gradually breaks down, typically within six to eighteen months. AlloClae® is a structural adipose matrix that holds its shape and is intended to incorporate into surrounding tissue, giving a more tissue-like feel and a different longevity profile.
Does AlloClae face treatment hurt?
Most patients find it very tolerable. The area is numbed with local anesthetic before placement, and no general anesthesia is required. Mild tenderness and swelling afterward are normal and generally resolve within a few days.
What is recovery like after AlloClae in the face?
Most patients return to normal activities within 24 to 48 hours. Swelling is the main effect and resolves over one to two weeks. Strenuous exercise and heavy lifting should be avoided until Dr. Santos clears you.
Who should not get AlloClae?
Patients with severe allergies, a history of anaphylaxis, an active infection in the treatment area, or expectations of a dramatic change are not ideal candidates. Patients with significant skin laxity may need a surgical procedure in addition to or instead of volume restoration.
Where can I find AlloClae for face near me?
Seattle Plastic Surgery offers AlloClae for face in Seattle and serves patients across the Puget Sound region, including Bellevue, Kirkland, Redmond, Tacoma, and Everett. If you have been searching for AlloClae near me or AlloClae filler near me, our downtown Seattle location makes expert treatment accessible to patients throughout Western Washington.
